[tomboy-list] Fwd: Developing Tomboy for OS X

[Doug Johnston]

<Sorry if this is sent twice to anyone>

Things work correctly if you set the hint-paths for all the *-sharp
 assemblies. I copied them out of the tasque csproj and things worked
 fine for me. I attached a diff and the updated file. Hope this helps
 for now until things get straightened out.

 --Doug


> On Fri, Nov 14, 2008 at 6:16 AM, Sandy Armstrong
> <sanfordarmstrong at gmail.com> wrote:
>> Ugh, I see the same problem now too.  The references are all good in the
>> MD project; I don't know what's up.  As I said, a mess.  Makefiles will
>> be easier while MonoDevelop is in this alpha-y state on OS X.
>>
>> Hopefully I'll have time this weekend.
>>
>> Sandy Armstrong wrote:
>>> Will have to look more at this later, but in the past I had to build the
>>> Tomboy project, then each add-in project...I would get errors if I tried
>>> to rebuild the whole solution.  Not sure what's up with it.  Try and see
>>> if that works for you?
>>>
>>> I'm going to give up and just get the makefiles working, probably
>>> (following Banshee's example).  Then you'll be able to build via MD's
>>> makefile integration, but you'll have to run autogen.sh first.  Just
>>> need some time to sit down and do it.
>>>
>>> Alexander Schearer wrote:
>>>
>>>> Any steps I need to take besides running the installers for Mono and
>>>> MonoDevelop? When I load the solution in MonoDevelop and attempt to
>>>> build I get an error about finding the GTK assembly.
>>>>
>>>> On Nov 13, 2008, at 9:56 AM, Sandy Armstrong wrote:
>>>>
>>>>
>>>>
>>>>> Alexander Schearer wrote:
>>>>>
>>>>>
>>>>>> Hey I'm interested in working on Tomboy's recent mac incarnation.
>>>>>> Truth be told though I'm a little overwhelmed by the project -- where
>>>>>> should I start looking? So far I've started with revision 2229 which
>>>>>> appears to relevant... If I wanted to start hacking should I simply
>>>>>> check out the entire tree and start with the files touched in this
>>>>>> revision?
>>>>>>
>>>>>>
>>>>> Alex,
>>>>>
>>>>> Building Tomboy on OS X is a bit of a mess right now...I'll respond
>>>>> later with some more details for you, but here are some quick tips:
>>>>>
>>>>> * Follow everything but the build instructions on this wiki page:
>>>>> http://live.gnome.org/Tomboy/Developers
>>>>> * Make sure you have Mono 2.0.1 and MonoDevelop 1.9 installed from
>>>>> mono-project.com.
>>>>> * Open up Tomboy.mac.sln and start playing with it.  You can use
>>>>> MonoDevelop to build, and bundle-mac-app.sh to create a Tomboy.app to
>>>>> test after you build.
>>>>>
>>>>> Help on the Mac side would be very much appreciated, is there anything
>>>>> in particular that interests you?  Here are the open mac bugs:
>>>>>
>>>>> http://bugzilla.gnome.org/buglist.cgi?product=Tomboy&bug_status=NEW&bug_status=REOPENED&bug_status=ASSIGNED&bug_status=UNCONFIRMED&component=General&op_sys=Macintosh
>>>>>
>>>>> Will write more later,
>>>>> Sandy
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>> _______________________________________________
>> Tomboy-list mailing list
>> Tomboy-list at lists.beatniksoftware.com
>> http://lists.beatniksoftware.com/listinfo.cgi/tomboy-list-beatniksoftware.com
>>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hint-path-mac.diff
Type: application/octet-stream
Size: 3167 bytes
Desc: not available
URL: <http://lists.beatniksoftware.com/pipermail/tomboy-list-beatniksoftware.com/attachments/20090107/2db236b9/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tomboy.mac.csproj
Type: application/octet-stream
Size: 17223 bytes
Desc: not available
URL: <http://lists.beatniksoftware.com/pipermail/tomboy-list-beatniksoftware.com/attachments/20090107/2db236b9/attachment-0003.obj>